OWL pattern

A cute little project to use up any leftover yarn.

Skills required

Crocheting in round, single crochet stitch, magic ring, increasing, invisible decreasing, finishing an open piece (see tutorial 3), fastening yarn tails.

Size

About 6,5cm (2.6”), with worsted weight cotton yarn and a 2,25 mm crochet hook (US size 1/B).

Materials & Tools

- Yarn. I used worsted weight cotton, 92m/50g (100yds/50g) / 10ply / 9wpi / 4: medium. You will need about 17g or 31m (34yds) of yarn – 12g for the body and 5g for details.
- 2,25 mm crochet hook (US size 1/B).
- Stuffing - polyester fiberfill, wool, wadding etc.
- 9mm (1/3”) safety toy eyes or buttons, beads, felt etc.
- Embroidery floss.
- Yarn needle, scissors, stitch marker.

Abbreviations

- mr, n = magic ring - crochet n single crochet stitches in to the loop. 
- sc = single crochet stitch 
- sc n = make n single crochet stitches, one in each stitch 
- inc = increase – make two single crochet stitches in to the same stitch 
- inc3 = double increase – three single crochet stitches in to the same stitch
- dec = decrease – crochet two stitches together 
- (sc 2, inc) x 6 = repeat the pattern between brackets six times 
- (24) = number of stitches in a round after finishing said round

Notes

- Do not join at the end of each round, work in a continuous spiral. 
- Use a stitch marker or a piece of yarn to mark the end or the beginning of a round. Move the marker up after completing each round. 
- All stitches are worked into both loops.

Body Worked from bottom to top. 1: mr, 6 = (6) 2: (sc, inc3x 2) x 2 = (14) 3: sc 3, inc3x 2, sc 5, inc3x 2, sc 2 = (22) 4: sc 4, inc x 3, sc 8, inc x 3, sc 4  (28) 5: sc 6, inc x 2, sc 12, inc x 2, sc 6  (32) Place a stitch marker (or a piece of yarn) in to the 19th stitch on round 11. This marks the center of the face. 6-12: sc in each stitch = (32) 13: sc 10, dec, sc 14, dec, sc 4 = (30) 14: sc 14, dec, sc 4, dec, sc 8 = (28) 15: sc 6, dec, sc 18, dec = (26) 16: sc 2, dec, sc 11, dec, sc 9 = (24) 17: sc, dec, sc 8, dec, sc 3, dec, sc 6 = (21) 18: sc, dec, sc 4, fasten off = (20) Make a slip stitch in to the next stitch. Cut the yarn, leaving a long tail and draw the end through the stitch. Attach safety eyes and then stuff the body. Leave the top seam open for now.

Eye patch - safety eyes Note! Join all rounds with a slip stitch (sl st) to get perfectly round eye patches. 1: mr, 7, join round with a sl st = (7) NB! Insert the safety eye in to the loop and draw the loop tightly closed around it. 2: ch 1, inc, around = (14) Fasten off cleanly and weave in the yarn tail on the wrong side. Eye patch - embroidered eyes Note! Join all rounds with a slip stitch (sl st) to get perfectly round eye patches. 1: mr, 7, join round with a sl st = (7) 2: ch 1, inc, around = (14) Fasten off cleanly and weave in the yarn tail on the wrong side.

Left wing 1: mr, 6 = (6) 2: inc x 2,[sc,hdc],[hdc,dc],[dc,tc,tc] = (11) Right wing 1: mr, 6 = (6) 2: inc x 2,[sc,hdc],[hdc,dc],[dc,tc,tc] = (11) Cut the yarn and weave in the yarn tail. Finish the edge by crocheting around it with single crochet stitches (see below).

Finishing the wings

1. Attach the yarn with a slip stitch. Continue crocheting with sc-s, increasing after every two stitches.

2. Make four sc-s in to the stitch at the tip of the wing. Finish the edge and fasten off cleanly.

Assembling the owl

1. Place the eyes to either side of the stitch marker.

2. Make sure you are satisfied with the placement before pushing the washer in to place.

3. Sew the eye patches to the body.

4. Embroider the eye(s) and beak.

  

5. Sew the wings to the body, making a few stitches through the center and around the top edge.

6. Add a bit more stuffing and close up the top seam, using the long yarn tail left on the body.

7. Fasten all yarn tails securely and hide them inside the body.

8. Draw a few yarn pieces through the top corner. Make a knot and push it close to the body. Cut off extra yarn.

POLA BUNGA KRISAN(Knit Flower Pattern Crisan)

BERIKUT POLANYA

 (Knit Flower Pattern Crisan)

1.  6Ch, St
2. 20 dc, St
3. ch,dc, 2dc, dc, ch, st ulangi 5 kali
4. balik ambil dari sisi dalam dc, 2dc sampai total 30 dc
5. ch, 2dc, dc, 2dc, ch, st ulangi sampai 5 kali....

bisa juga difariasikan dengan menambah daun

CUTE PATTERN DOLPHINES SAFE FOR HP TOUCH SCREEN

Berikut pola gantugan amigurumi lumba-lumba lucu, tambahan alat yaitu jarum besar, untuk menjahit masing2 bagian..
Berikut polanya

Dolphin Amigurumi Pattern

dolphin-amigurumi-1

• Materials:

-          Sport weight yarn in baby blue and white

-          Size F/3.75 mm crochet hook

-          1 pair of 9 mm solid black safety eyes

-          Blunt tapestry needle

-          Scissors

-          Stuffing of your choice

• Body:

Using baby blue yarn,

R1: Ch 2, 6 sc in second st from hook – 6 sts

R2: 2 sc in each st around – 12 sts

R3: 1 sc, 2 sc in next st (repeat around) – 18 sts

R4: 2 sc, 2 sc in next st (repeat around) – 24 sts

R5 – R9: sc in each st around – 24 sts

dolphin-amigurumi-2

Switch to white yarn.

R10: 2 sc, 1 dec in next st (repeat around) – 18 sts

R11: 1 sc, 1 dec in next st (repeat around) – 12 sts

dolphin-amigurumi-5

Insert the 9 mm solid black safety eyes into the head.  Insert the eyes between R8 and R9.  Leave 4 sts in between the eyes for the most ideal spacing.  Fasten the eyes in place.

dolphin-amigurumi-4

Stuff the body with your choice of stuffing.

dolphin-amigurumi-3

R12: 1 dec in each st around – 6 sts

Fasten off, leaving a long tail.

Using a blunt tapestry needle and the long tail of yarn, sew the hole at the bottom of the body closed.

dolphin-amigurumi-12dolphin-amigurumi-11

Once the hole is closed, hide the stray tail inside of the body.  Using the tip of your scissors gently stuff the tail end into the body.

dolphin-amigurumi-10

With that, the body is complete!

dolphin-amigurumi-9

• Snout:

Using baby blue yarn,

R1: Ch 2, 6 sc in second ch from hook – 6 sts

R2: sc in each st around – 6 sts

R3: 2 sc in the next 4 sts (leave the last 2 sts in the round empty) – 8 sts

Fasten off, leaving a long tail.

dolphin-amigurumi-7

Place the snout between the eyes and sew in place.  Position the snout so that the wider bottom half faces down and the smaller top half faces up.

dolphin-amigurumi-16

Finish sewing the snout in place onto the body.

dolphin-amigurumi-14

• Fins (make 2 of these):

Using baby blue yarn,

R1: Ch 2, 4 sc in second ch from hook – 4 sts

R2: 2 sc in each st around – 8 sts

Fasten off, leaving a long tail. Pinch each piece in half so that they form semi-circles.

dolphin-amigurumi-21

Using the blunt tapestry needle, sew the fins onto the sides of the body.  I like to place the fins more towards the back of the body rather than exactly at the sides.  It looks more like it’s swimming in this position!

dolphin-amigurumi-20

Once sewn, it should look like this.

dolphin-amigurumi-17

Repeat the same process with the other fin.  Be sure to position the fin on the body as symmetrically as possible.  Re-position as many times as needed to achieve the most symmetrical position.

Now, it should have 2 fins!

dolphin-amigurumi-30

• Top Fin:

Using baby blue yarn,

R1: Ch 2, 3 sc in second ch from hook – 3 sts

R2: 2 sc in each st around – 6 sts

Fasten off, leaving a long tail.  Pinch the piece in half to form a semi-circle like the side fins.

dolphin-amigurumi-26

Sew the fin onto the top of the body.  I staggered the fin slightly below the center of the top, just to give it a little more style.

dolphin-amigurumi-2

• Tail:

Using baby blue yarn,

R1: Ch 2, 3 sc in second ch from hook – 3 sts

R2: 2 sc in each st around – 6 sts

R3: 1 sc, 2 sc in next st around – 9 sts

R4: 2 sc, 2 sc in next st around – 12 sts

Fasten off, leaving a long tail.  Do not stuff the tail.  The shape should look like a cone.

Sew the tail onto the back end of the body.

dolphin-amigurumi-44

Once sewn, it should look like this.

dolphin-amigurumi-42

• Tail Fin:

Using baby blue yarn,

Ch 2, 6 dc in second ch from hook.  The shape should resemble a small fan.  Fasten off, leaving a long tail.

Enjoy!